Rebates
Your interest in our conservation program is appreciated. Our goal through Energy Services is to help improve your home’s performance, save you money, and add comfort. The current rebate schedule is effective October 1, 2025 through September 30, 2027. All our programs are evaluated on a bi-annual basis and may be subject to expiration or suspension.
ALL PROJECT APPLICATIONS MUST BE RECEIVED BY KPUD WITHIN FIVE (5) MONTHS OF THE COMPLETION DATE TO BE ELIGIBLE FOR A REBATE.
Here’s a look at the rebates available to Klickitat PUD customers:
FREE Google Nest Smart Thermostat
Klickitat PUD is partnering with General Pacific on a promotional offering with deep discounts on Smart Thermostats!
Order a Free Thermostat here or by calling 503–907-2903.
Smart thermostats save energy automatically and offer the added convenience of letting you control your heating and A/C remotely from your phone. The Smart Thermostats offered through this program are ENERGY STAR certified, meaning they have been independently certified and field tested to deliver energy savings.
Eligibility is limited and customers should verify compatibility prior to placing an order.
Appliances
Please review complete documentation provided for each appliance. For more information on appliance rebates contact us.
Clothes Washer and Dryer
Requirements:
These measures are available for all types of residential buildings (single-family, manufactured and multifamily). The new appliance must be ENERGY STAR qualified. See Rebate Packet for more details on combination units rebate allowance.
- Clothes Washers must be ENERGY STAR qualified.
- Clothes Dryers must be electric and ENERGY STAR qualified.
Appliance + Rebate
Clothes Washer: Any Energy Star — $75.00
Clothes Dryer: Any Energy Star — $75.00
Washer & Dryer Rebate Packet [PDF]
Washer & Dryer Rebate Application [PDF]
Heat Pump Water Heaters (Unitary and Split-Systems)
Heat pump water heaters that qualify for rebates depend on approval based on (1) our Qualified Products List and (2) installed, according to manufacturer’s specifications. This measure can be self-installed or the installer must have received installation training from the manufacture of the installed equipment, if available.
Minimal qualifications: Available for existing single-family homes and manufactured home. New construction does not qualify. Product must be listed on our Qualified Products list:
Appliance + Spec + Rebate
Unitary HPWH — 40 Gallon — $1200
Unitary HPWH Tier 3 — 50 gallon and above + $1600
Unitary HPWH Tier 4 — 50 gallon and above — $1600
Split-System HPWH — Any size — $2000
Heat Pump Water Heater Rebate Packet [PDF]
HPWH_Qualified Product List [PDF]
HPWH Do It Yourself Guide [PDF]
Visit Comfort Ready Home for a participating vendor list.
Commercial Lighting
New rebate offer coming soon!
Modern society requires outdoor lighting for a variety of needs, including safety and commerce. Klickitat PUD recognizes this but advocates that any required lighting be used wisely to minimize the harmful effects of light pollution. Before installing new lighting, please contact your local municipality for any outdoor lighting ordinances.
KPUD recommends that lighting should:
- Only be on when needed
- Only light the area that needs it
- Be no brighter than necessary
- Minimize blue light emissions
- Be fully shielded (pointing downward)
Types of Light
Most people are familiar with incandescent or compact fluorescent bulbs for indoor lighting, but outdoor lighting usually makes use of different, more industrial, sources of light. Common light sources include low-pressure sodium (“LPS”), high-pressure sodium (“HPS”), metal halide and light-emitting diodes (“LEDs”). LPS is very energy efficient, but emits only a narrow spectrum of pumpkin-colored light that some find to be undesirable. Yet, LPS is an excellent choice for lighting near astronomical observatories and in some environmentally sensitive areas.
HPS is commonly used for street lighting in many cities. Although it still emits an orange-colored light, its coloring is more “true to life” than that of LPS. In areas where it’s necessary to use white light, two common choices are metal halide and LEDs. One of the advantages of LED lighting is that it can be dimmed. Thus, instead of always lighting an empty street or parking lot at full brightness, LEDs can be turned down, or even off, when they aren’t needed and then brought back to full brightness as necessary. This feature both saves on energy and reduces light pollution during the night.
Because of their reported long life and energy efficiency, LEDs are rapidly coming into widespread use, replacing the existing lighting in many cities. However, there are important issues to consider when making such a conversion.
Color Matters
It is important to have fully shielded lighting, but we now know that the color of light is also very important. Both LED and metal halide fixtures contain large amounts of blue light in their spectrum. Because blue light brightens the night sky more than any other color of light, it’s important to minimize the amount emitted. Industry standards for dark sky recommend using lighting that has a color temperature of no more than 3000 Kelvins.
Lighting with lower color temperatures has less blue in its spectrum and is referred to as being “warm.” Higher color temperature sources of light are rich in blue light. Industry standards for dark sky recommend that only warm light sources be used for outdoor lighting. This includes LPS, HPS and low-color-temperature LEDs. In some areas, the white light of even a low-color-temperature LED can be a threat to the local nighttime environment. In those cases, LPS or narrow-spectrum LEDs are preferred choices.
Commercial Rebates
The Commercial Sector includes service-providing facilities and equipment of businesses; federal, state, and local governments; and other private and public organizations. The Commercial Sector is generally defined as non-manufacturing business establishments, including hotels, motels, restaurants, wholesale businesses, retail stores, health, social and educational institutions.
KPUD offers rebates for some of the following:
Commercial HVAC Rebate Packet [PDF]
Commercial Weatherization & FoodService Rebate Packet [PDF]
Non-Residential Rebate Application [PDF]
Commercial Heating and Cooling Measures:
Ductless Heat Pumps (retrofits & upgrades)
Air-Source Heat Pumps (retrofits & upgrades)
Connected Thermostats
Packaged Terminal Heat Pumps
Variable Frequency Drive on Air Handling Units Fans
Advanced Rooftop Unit Controls
Variable Refrigerant Flow System-Retrofit Only
Commercial Shell Weatherization Measures:
Building Insulation
Commercial Windows
Heat Pump Water Heaters
Commercial Refrigeration Measures:
Anti-Sweat Heater Controls
Walk-in or Display Case Evaporator Fan Motors
Strip Curtain for Walk-in Coolers & Freezers
Commercial Kitchen & Food Service Equipment Measures:
Refrigerated Display Case Door Retrofit
Other Commercial Rebates:
Generator Block Heaters
Vehicle Engine Block Heater Controls
Variable Frequency Drive for Pumps
Non-Residential Lighting
Custom Projects
Heating & Cooling
Do you have an outdated or inefficient heating and cooling system? Ask about today’s energy-efficient technologies and associated rebates and start enjoying comfort and savings.
Forms that apply to this entire section:
Visit Comfort Ready Home for a participating vendor list.
Ductless or Ducted Mini-Split Heat Pumps
Minimum criteria:*
Measure — Approved Ductless and Ducted Mini-Split Heat Pumps Minimum 7.5 HSPF2
Rating — Must meet federal minimum requirements
Rebate — $900
*Qualifying homes are existing single-family or existing and new manufactured homes.
*Installations must be performed by a KPUD approved contractor.
*Refer to the Heating & Cooling rebate packet (above) for program details.
Best Practices for installing Ductless Heat Pumps
Smart Thermostats — $140 rebate
Nothing says modern comfort like a smart thermostat that lets you control your homes heating and cooling from anywhere. Qualifying homes must have electric forced air furnace or air source heat pump as the primary heating system and is available for single-family and manufactured homes.
Qualifying products must be listed on the BPA Smart Thermostat Products list.
How can I get a FREE Google Nest Thermostat?
Turn up your savings at no cost! We are offering a Google Nest Thermostat at NO COST to active customers.
Simply sign up and our fulfillment partner will send your thermostat to your door. This offer is available to KPUD residential customers with either an electric furnace or ducted air-source heat pump as their home heating system. Limited to one thermostat per household.
Get started today by going through the Compatibility Checker and then placing an order for your free Google Nest Thermostat!
Smart Thermostat Rebate Packet [PDF]
Smart Thermostat Rebate Application [PDF]
Smart Thermostat Qualified Product List [PDF]
Air Source Heat Pump
Minimum criteria:*
| Existing Residential Heating Source | Home Type | ||||
| Single-Family Existing | Single Family-New Construction | Manufactured-Existing | Manufactured-New | Multifamily-All | |
|---|---|---|---|---|---|
| Existing Air-Source Ducted Heat Pump | Upgrade | Not Eligible | Upgrade |
YES Eligible once located on site with proof of occupancy permit (Treat as MH Existing) |
Not Eligible |
| Electric Forced-Air Furnace | Conversion Only | Conversion Only | |||
| Ductless Mini-Split Heat Pump | Upgrade | Upgrade | |||
| Zonal (Electric) | Upgrade | Upgrade | |||
| Wood | Upgrade | Upgrade | |||
| Oil/Propane/Gas | Upgrade | Upgrade | |||
| None Existing | Upgrade | Upgrade | |||
Measure — Air Source Heat Pump: UPGRADE to Variable Speed Heat Pump Only (from existing heat pump)
Rating — Minimum federal standards must be met Example 7.5 HSPF2, 14.3 SEER2
Rebate — $600
Measure — Air Source Heat Pump: CONVERSION from Electric Forced Air Furnace Only (standard speed models)
Rating — Minimum federal standards must be met Example 7.5 HSPF2, 14.3 SEER2
Rebate — $1200
Measure — Air Source Heat Pump: CONVERSION from Electric Forced Air Furnace Only (variable speed models)
Rating — Minimum federal standards must be met Example 7.5 HSPF2, 14.3 SEER2
Rebate — $1500
Measure — Ground Source Heat Pumps
Rating — Refer to the Heating & Cooling rebate packet (above) for program details.
Rebate — $500-$3500
Measure — Prescriptive Duct Sealing: Single Family & Manufactured Homes
Rating — Ask for details
Rebate — $250
*Installations must be performed by a Washington State licensed installer.
*Heat pumps may require Duct Sealing which may not be eligible for additional rebate.
*All installations must be per BPA standards Best Practices for installing ASHP AND VSP and installed by KPUD approved vendors.
Duct Sealing Rebate $250
In houses with forced-air heating and cooling systems, ducts are used to distribute conditioned air throughout the house. In a typical house, however, about 20 percent of the air that moves through the duct system is lost due to leaks, holes, and poorly connected ducts. The result is higher utility bills and difficulty keeping the house comfortable, no matter how the thermostat is set. A duct system that is well-designed and properly sealed can make your home more comfortable, and energy efficient.
Refer to the Heating & Cooling rebate packet above for eligibility and requirements.
Duct Sealing Data Collection Form [PDF]
Prescriptive Duct Sealing Specifications and Best Practices
Ground Source Heat Pump
KPUD will pay up to a $3,000 rebate on approved Ground Source Heat Pumps. Some restrictions do apply.
Minimum criteria:
- This rebate is available for single-family homes and some new construction that currently heat with electric.
- Ground source heat pump must be installed by a IGSHPA certified technician.
- Ground source heat pump must be Energy Star qualified.
Refer to the Heating & Cooling rebate packet above for eligibility and requirements.
KPUD reserves the right to make changes based on BPA changes and is subject to the availability of funds.
Agriculture
Agriculture is an important part of Klickitat County. Our region is consistently challenged with long droughts and water shortages. Irrigators have a unique opportunity to help mitigate these water shortages, increase irrigation uniformity, decrease the amount of water and fertilizer required, all while using less energy.
Irrigation Conservation Videos
KPUD Agriculture Rebates:
Agriculture Rebate Packet [PDF]
Non-Residential Rebate Application [PDF]
Irrigation Hardware Completion Form [PDF]
Livestock Watering Rebate Application [PDF]
Irrigation Hardware Upgrades
New sprinklers, nozzles, regulators, and gaskets, can reduce the pressure required at the pump, save water, improve water application uniformity, and save energy. As equipment wears out, making the switch to more energy-efficient hardware is one of the easiest ways to start saving water and power. For more information review the Agricultural Rebate Packet shown above.
Variable Frequency Drives and Pump Upgrades
VFD’s are designed to adjust the irrigation pump motor speed to match the changing irrigation (flow and pressure) requirements. The VFD controls the frequency of the electrical power supplied to the motor. Even small speed adjustments using a VFD can create big energy savings. Often as much as 10–20 percent. This will also provide greater precision and tighter control over water distribution and pressure, and help the pump match-flow requirements. Contact us to learn more.
New High-Efficiency Irrigation Pumps
Over time, some irrigation pumps may become worn out, leak water, and become less efficient. Or the old irrigation pump might not be a good match to the current irrigation system requirements. Installing a new, more efficient pump will help restore your irrigation system to the best operating point and save energy. Pared with a VFD, you can save even more energy.
Irrigation System Evaluation and Pump Testing
Irrigation system analysis or pump testing may identify opportunities to increase the efficiency of a pumping plant and irrigation delivery system. These opportunities may include low-pressure conversion for center pivots and laterals, reduction of friction losses in piping, rebuilding pumps, and trimming pump impellers.
Weatherization
New Construction Manufactured Home — The Northwest Energy-Efficient Manufactured Housing Program (NEEM)
The Northwest Energy-Efficient Manufactured Housing Program known as NEEM is a collaborative effort between homebuilders, retailers, and utilities across the northwest that certifies the most energy-efficient manufactured homes built. The NEEM Program’s objective third-party quality assurance means homes perform as what is called “Efficiency Certified.”
Qualifying new construction manufactured homes must be electrically heated, installation completed with occupancy permit, active KPUD utility account, and be certified with the NEEM Energy Star compliance requirements of versions 1.1, 2.0 or NEEM+.
For more information on NEEM manufactured homes, visit their website.
NEEM Manufactured Home Rebate Packet [PDF]
NEEM Manufactured Home Rebate Application[PDF]
Existing Home Weatherization
Air leaks and insufficient insulation and windows contribute to drafts, uncomfortable temperatures in your home, and higher electric usage.
Take control of comfort and energy bills, learn more about weatherization and available rebates.
Residential Weatherization Rebate Packet [PDF]
Weatherization Rebate Application [PDF]
Residential Weatherization Specifications 2023 [PDF]
Visit Comfort Ready Home for a participating vendor list.
Insulation
Measure — Attic, Existing (Single Family)
Existing — R‑0 to R‑7
Proposed — Increase to minimum R‑38
Rebate — 1.50/sq. foot
Measure — Attic, Existing (Single Family)
Existing — R‑8 to R‑11
Proposed — Increase to minimum R‑38
Rebate — .50/sq. foot
Measure — Existing Manufactured Home
Existing — Equal to R‑0
Proposed — Increase to minimum R‑22
Rebate — .75/sq. foot
Measure — Wall, Existing (Single Family)
Existing — Equal to R‑0
Proposed — Increase to R‑11 or R‑19, whichever is practical
Rebate — 1.30/sq. foot
Measure — Wall, Existing Manufactured Home
Rebate — No incentive
Measure — Floor, Existing (Single Family)
Existing — Equal to R‑0
Proposed — Equal to R‑0 R‑19 or maximum level needed to fill joist cavities
Rebate — .50/sq. foot
Measure — Floor, Existing Manufactured Home
Existing — Equal to R‑0
Proposed — Increase to R‑22 or maximum level needed to fill the joist cavities
Rebate — .75/sq. foot
Measure — Multi-Family & Low Income
Existing — Inquire about custom project
Rebate — Calculated per project
Measure — Exterior Insulated Door
Existing — Any exterior door
Proposed — Replace with ENERGY STAR-qualified door
Rebate — $40.00 per exterior door replaced
Windows
Measure — Window Replacement & Patio/French Doors
Existing — Single and double with any frame type
Proposed — Increase to Energy Star windows with a U‑Factor of .30 or lower; Energy Star patio/French doors with a U‑Factor of .35 or lower
Rebate — $6.50 per square foot of existing window space
Income-Qualified Rebate Program
The best way to reduce your overall utility bill is to use less energy and water. Efficient appliances and weatherization upgrades can help. Income-qualifying customers may be eligible for enhanced rebates towards heating systems, insulation, windows, and more.
Our Income-qualified program at KPUD go beyond mere energy savings, offering a range of additional benefits.
Here’s what sets them apart:
- Higher incentive values
- Funds available for repair costs
- Qualification is based on household income
- Potential collaborations with Community Action Agencies
Income-Qualified Rebates:
Qualifying Measures — Prime Windows & Sliding Doors (existing must be wood or aluminum)
Proposed Rebate — $45/Sq. Foot
Qualifying Measures — Exterior Insulated Door(s)
Proposed Rebates — $700/door
Qualifying Measures — Attic Insulation
Proposed Rebates — Dollar for Dollar
Qualifying Measures — Floor Insulation
Proposed Rebates — Dollar for Dollar
Qualified Measures — Wall Insulation
Proposed Rebates — Dollar for Dollar
Qualified Measures — Unitary Heat Pump Water Heater
Proposed Rebates — up to $3,000
Qualified Measures — Smart Thermostat
Proposed Rebates — $400
Qualified Measures — Ductless Heat Pump
Proposed Rebates — $9000 promotional pricing, expires 3/31/2026
Qualified Measures — Air Source Heat Pumps
Proposed Rebates — $9,000
Qualified Measures — Energy Star Clothes Washer & Dryers
Proposed Rebates — $800 each
Qualified Measures — Custom Projects
Proposed Rebates — Contact us for information
*Not all measures may be available for all housing types. Refer to the KPUD Income Qualified Home Rebate Packet for detailed project information and requirements. Rebates are subject to change and availability.
Income Qualified Rebate Package [PDF]
Income Qualified Rebate Application [PDF]
Income Eligibility (see new values below):
For eligibility, we follow the Federal and Washington Weatherization Assistance Program guidelines, defining income-qualified households as those with gross incomes at or below 80% of the Area Median Income Level (AMI) or 200% of the Federal Poverty level (FPL).
Here are the details (effective 4/1/25):
Number in Household — 1 Person
Maximum Annual Qualifying Gross Income Level 2025 — $53,100
Number in Household — 2 People
Maximum Annual Qualifying Gross Income Level 2025 — $60,700
Number in Household — 3 People
Maximum Annual Qualifying Gross Income Level 2025 — $68,300
Number in Household — 4 People
Maximum Annual Qualifying Gross Income Level 2025 — $75,850
Number in Household — 5 People
Maximum Annual Qualifying Gross Income Level 2025 — $81,950
Number in Household — 6 People+
Maximum Annual Qualifying Gross Income Level 2025 — Contact Utility
HEAR Grant Income-Qualified Grant
The HEAR GRANT is now closed through KPUD as we have fulfilled the financial obligation. If additional funding becomes available, this webpage will be updated accordingly.
Klickitat PUD Has been awarded grant funding by the Washington State Department of Commerce to assist low and moderate-income households with home upgrades with electric air-source heat pumps and electric heat pump water heaters. With these additional funds, combined with our existing rebate program, we aim to cover most, if not all, of the costs for these approved installations.
The program requirements and instructions can be viewed by clicking below. Please note that the equipment specifications are more stringent than our typical rebate. When requesting estimates from contractors, please direct them to this document for reference:
“The Home Electrification and Appliance Rebates Program is supported with funding from Washington’s Climate Commitment Act. The CCA supports Washington’s climate action efforts by putting cap-and-invest dollars to work reducing climate pollution, creating jobs, and improving public health. Information about the CCA is available on their website.”
This information was provided by the State of Washington and is being transmitted by Klickitat PUD as a state requirement for grant eligibility. This should not be interpreted as utility support or opposition to any measure relating to the Climate Commitment Act.